829LC | Sliding Door / Showcase Ratchet  Lock
Less Cylinder
<<Back to Less Cylinder Locks
829R-LC Ratchet Lock
Accepts Schlage original/compatible key-in-knob cylinders.
Accepts Ilco key-in-knob replacement cylinder No. 1599

General Features:   Available Separately:
  • 829R-LC Ratchet lock - for bypassing sliding doors
  • Easily rekeyable: remove bottom plate, then remove set screw to remove cylinder
  • ANSI/BHMA: E07191
  • Includes 729RS-1 strap: 6" stainless steel strap for 3/16" to 1/4" glass thicknesses
  • Zinc die cast cylinder housing, steel strap
  • US26 or US26D finish
  • WARNING (Proposition 65)
  • 729RS-2 - optional 6" stainless steel strap for 3/8" material thickness (see dimensions below)
  • 729RS-3 - optional 6" adjustable stainless steel strap for up to 5/8" material thickness. This strap is adjustable and fits min. 3/8" material and maximum 5/8" material (see dimensions below)
Keying: Documents:
  • N/A - this lock is sold less cylinder
  • See our 78-201 Series Schlage C keyway compatible cylinders
  • Will accept other manufacturer's Schlage-compatible deadbolt or key-in-knob cylinders
  • 829-MD Medeco Driver Pack (available separately). Purchase of this optional driver pack will allow the 829R-LC to accept the following Medeco ( cylinders:
    • #20-009S4
    • #20-008S4
    • #20W009S4
    • #20W008S4
    • #20K009S4
    • #20W200S1
  • Complies with clause 7.2.1, 7.2.3, 7.3, 8.3 and 8.4 of ANSI/BHMA A156.11 ANSI standards for cabinet locks (Grade 1).
829R-LC Dimensions
729RS-2 Optional Strap
for 3/8" material thickness
729RS-3 Optional Strap (adjustable)
(Includes set screws to fit material thickness
from 3/8" min. to 5/8" max.)